– Radiated Emission Testing and Measurement

– Conducted Emission Testing and Measurement 

– Immunity testing (ESD, surge, EFT, radiated immunity)

– ESD Walking Voltage Measurement

– IEC & CISPR compliance evaluation

– Root‑cause investigation in real‑world conditions

– EMF measurement

– EMC Risk Analysis and Control Plan

– Onsite Inspection to Audit Installation Compliance

– Insulation resistance and earth continuity testing

– Functional testing

– Validation of installation in accordance to intended design and use

– Professional Engineer support

– Predictive Maintenance & Condition Monitoring: Periodic or continuous vibration survey to detect abnormalities or condition-based monitoring programs tailored to data center reliability needs.

– Vertical and Horizontal Vibration (Acceleration) Measurement

– Site Monitoring: Monitoring vibrations from external sources that may affect sensitive equipment from likes of Data Centres, Laboratories and Healthcare facilities, etc.

– Baseline/Acceptance Testing: Measuring vibrations during commissioning of new equipment to establish performance baselines.

– Technical documents review for conformity to applicable standard (e.g. SS 555)

– Review of existing lightning protection system (LPS) maintenance and inspection reports

– Site inspections for in accordance to “as built” and applicable standards

– Maintenance inspection and testing (e.g. air terminals, down-conductor, bonding, grounding & SPD)

– Continuity tests on parts of LPS and earth-termination system

– Review of risk assessment plan and inspection

– Comprehensive Site Surveys: Utilizing analyzers and sensors to monitor power quality over time for identifying issues

– Harmonic Analysis: Identifying and mitigating distortion caused by non-linear loads like VFDs, servers, and lighting.

– Voltage Variation Analysis: Recording and reporting on voltage variations to protect sensitive equipment

– Energy Efficiency Assessments: Evaluating power factor, peak demand, and energy consumption for optimal operations

– Illumination test
– Noise measurement
– Energy efficiency assessment
– Indoor air particle count and air particle concentration
– Room Positive Pressure measurement.
– Surface Resistance Measurement
– Vertical and Horizontal Vibration (Acceleration) Measurement

– Root cause investigation
– Material failure analysis
– Electrical and mechanical system failure investigation

– Witness testing – Independent third-party personnel monitor tests to ensure unbiased results and verify compliance with requirements.

– Factory Acceptance Testing (FAT): Conducted at the manufacturer’s facility before shipment to verify equipment design and performance, including documentation review, visual inspections, and functional tests.

– Site Acceptance Testing (SAT): Conducted on-site testing and inspection after installation to ensure equipment operates correctly in its intended environment, often covering integration with other systems.

– Customized Suppliers Readiness Audit: Customized audit protocol to provide unbiased assessment of suppliers’ capability, quality and readiness for the intended assignment