• Flaw detection (crack, corrosion, de-bond) Metal sorting
• Electrical conductivity
• Coating, plating, cladding & thin sheet thickness measurement

• Bubble test technique to detect leaks on weld seams
• Locate leaks in pressure boundaries

• Test of continuity of a protective coating
• Detect voids, cracks foreign inclusions or contaminants in the coating dielectric strength of the coating

• Ferrite detection in piping materials, welded cladding, and austenitic and duplex stainless steels
• Ferrite detection in piping materials, welded cladding, and austenitic and duplex stainless steels

• Inspection of paint or coating thickness
• Measure coating thickness on ferrous & non-ferrous materials

• Leeb Rebound Hardness Test – measures the hardness of materials.
• Brinell Hardness Test – determines the Brinell hardness of metallic materials.
• Ultrasonic Contact Impedance Hardness Test – assesses the hardness of materials in multiple scales (Brinell, Vickers, Rockwell)

• Relieves residual stresses, improves mechanical properties, and prevents cracking in welds.
• Enhances weld toughness and ductility, meets industry code requirements, and ensures structural integrity.
• Common in pressure vessels, piping, and structural steel.

• Reduces risk of cold cracking, improves weld quality, and facilitates welding of thick or high-carbon materials.
• Enhances fusion, reduces thermal gradients, and ensures proper weld penetration.
• Used in construction, fabrication, and welding thick steel or high-carbon materials.

• Flaw detection (crack, corrosion, de-bond) Metal sorting
• Electrical conductivity
• Coating, plating, cladding & thin sheet thickness measurement

For internal corrosion and pitting in carbon steel tubing.

Acoustic Eye Testing (AET) is a specialised non-destructive testing (NDT) technique used for the rapid inspection of tubes, particularly in heat exchangers, boilers, condensers, and pipelines. It is widely valued for its high-speed screening capability and ability to detect internal defects without direct visual or contact-based inspection.

Long-Range Ultrasonic Testing (LRUT) is an advanced non-destructive testing (NDT) method used to inspect long lengths of pipes and structures from a single test location. It is especially effective for detecting corrosion, erosion, and wall thinning in inaccessible or insulated pipelines.

Corrosion Mapping using an RMS Scanner is an advanced ultrasonic testing (UT) technique designed to provide high-resolution thickness measurement and corrosion profiling across large surface areas. It is widely used to assess remaining wall thickness, corrosion distribution, and integrity of critical assets.

Positive Material Identification (PMI) is a critical non-destructive testing (NDT) method used to verify the chemical composition of metallic materials. It ensures that the correct alloy is used in critical systems, helping to prevent material mix-ups, failures, and compliance issues.

Our NDT Development and Consultancy focuses on delivering tailored inspection solutions, technical advisory, and method optimisation to support complex inspection challenges, asset integrity programmes, and compliance requirements.

At SETSCO, we provide Bore Scope / Remote Visual Inspection (RVI) services to perform internal visual examinations of equipment and components—without the need for dismantling. This enables our clients to quickly assess condition, identify defects, and minimise downtime.

At SETSCO, we provide Remote Field Eddy Current Testing (RFET) as a specialised NDT solution for the inspection of ferrous tubes, particularly in applications where conventional eddy current techniques are less effective due to magnetic properties.

At SETSCO, we provide Internal Rotary Inspection System (IRIS) as a high-precision ultrasonic testing method for the detailed inspection of tubes, particularly in heat exchangers, boilers, and condensers. Our IRIS service delivers accurate wall thickness measurements and corrosion profiling, enabling clients to make informed decisions on asset integrity and maintenance.

At SETSCO, we provide Acoustic Emission Testing (AE) as an advanced, real-time monitoring technique to assess the structural integrity and active defect behaviour of critical assets—while they are in operation.

We provide weld scanning services for carbon steel and exotic materials, delivering high-accuracy defect detection, real-time inspection insights, and audit-ready results to help you enhance safety, meet regulatory compliance requirements, and maintain the integrity of critical assets across your operations.

We provide Pulsed Eddy Current (PEC) testing for Corrosion Under Insulation (CUI), enabling non-intrusive inspection through insulation to detect corrosion and wall loss, helping you enhance safety, ensure regulatory compliance, and minimise downtime across critical assets.

We provide multi-sector advanced NDT techniques across oil & gas, power, marine, aerospace, manufacturing, and more—delivering precise defect detection and enhanced safety assurance by identifying potential failures early, preventing leaks or catastrophic breakdowns, and ensuring full compliance with international safety and regulatory standards.

We provide pipe rack inspection services to assess structural integrity, detect corrosion and wall loss, and identify potential defects—helping you ensure operational safety, prevent failures, and maintain compliance with industry standards across critical plant infrastructure.

We provide Magnetic Flux Leakage (MFL) testing for ferrous boilers and heat exchanger tubes, offering high-speed, non-intrusive inspection with minimal preparation to deliver fast and reliable detection of corrosion, pitting, and wall loss, enabling quantitative assessment of defect severity while helping you ensure asset integrity, enhance operational safety, minimise downtime, and meet regulatory compliance requirements.

We provide 3D Laser Scanning services that use high-resolution technology to capture precise 3D asset models for accurate corrosion profiling, tank surveys and volume calculations, delivering full-surface coverage, millimetre-level measurements, and digital, compliance-ready data to enhance safety, reduce inspection risks, and support informed maintenance planning..

We provide Short-Range Ultrasonic Testing for Corrosion Under Pipe Supports (CUPS) across industries such as oil & gas, petrochemical, power generation, marine, manufacturing, infrastructure, and more—enabling accurate detection of hidden corrosion and wall loss in critical support areas to enhance safety, prevent unexpected failures, and ensure regulatory compliance.

We provide Ambient and High-Temperature Corrosion Mapping to accurately detect and monitor corrosion and wall thinning under varying operating conditions—helping you enhance asset integrity, ensure operational safety, and maintain compliance across critical equipment. Provide your feedback on BizChat

We provide comprehensive Storage Tank Inspection services—including tank surveys, corrosion mapping, annular plate inspection, MFL on tank floors, and UTG on tank shell plates using crawler systems—to deliver accurate defect detection, reliable condition assessment, and audit-ready data that enhance operational safety, prevent leaks or failures, and ensure full regulatory compliance.