SETSCO

Calibration & Measurement

Setsco is one of the pioneer laboratories that complies with the requirements of ISO/IEC 17025 and accredited by SAC-SINGLAS, is extending a full range of metrology services to help industries meet or maintain their stringent requirement of ISO 9000 in calibration.

We maintain a fully equipped measurement laboratory with close environment control and full traceability to National and International Standards. You can be assured of our consistency, competency and efficient service of sterling standards from our team of qualified engineers and well-trained technical officers.


Standard Weight / Balances

The calibration electronics and mechanical balances are ranged from 1mg to 1000kg. The calibration for precision test weights ranged from 1g to 25kg.


Pressure / Vacuum

Our capability in calibrating pressure and vacuum measuring devices includes:

  • • Gauges
  • •Transducers
  • •Recorders

The calibration and measurement capability is 0.2% of applied pressure for up to 60,000 psi and 0.002 bar for vacuum calibration.


Force

In force calibration, we are able to verify force measuring devices such as:

  • • Force Measuring Devices
  • • Universal Testing Machines
  • • Compression Testing Machines
  • • Transverse Testing Machines
  • • Load Cells / Proving Rings
  • • Adhesion Tester / Hydraulic Jacks
  • • Cable Stressing
  • • Batching Plants
  • • Hardness Machine
  • • Durometer
  • • Extensometer
  • • Torque Wrench (Up to 2,500 Nm)

Calibration capacity can be up to as high as 3,000kN


Temperature

Our temperature calibration capability includes:

  • • Ovens, Chiller, Freezer, Liquid Bath, Furnaces & Environmental Test Chamber
  • • Liquid-in-glass Thermometers
  • • Thermocouples & Resistance Temperature Detectors (with or without Display)
  • • Temperature Indicator Controller & Recorder (Types E, J, K, N, R, S & T; RTD)
  • • Dry Block Calibrator
  • • Humidity Calibration

The calibration range is from -80to 1000
The calibration measurement capability up to 0.07


Dimension

We provide periodic inspection of dimensional instruments such as:

  • •Calipers / Micrometers
  • •Dial Indicators / Dial Gauges
  • •Pin Gauges / Snap Gauges
  • •Heights Gauges
  • •Straight Edge
  • •Thickness Gauge
  • •Ultrasonic Thickness Gauge
  • •Ultrasonic Coating Thickness Gauge
  • •Plug Gauges / Ring Gauges
  • •Thread Plug Gauges / Thread Ring Gauges
  • •Engineering Square and Parallels
  • •Steel / Granite (Grade ‘0’ & Below)
  • •Welding Inspection Gauge
  • •UT Calibration Block
  • •Universal Length Machine
  • •Measuring Projector / Toolmaker Microscope

Measurement

We also provide customised measurement service to ensure dimensional conformity (e.g. flatness, linearity and roundness) of jigs, fixtures, components and products.


Electrical

We also provide inspection of electrical instruments and devices such as:

  • •Multimeter
  • •Clamp Meter
  • •Volt & Amp Meter
  • •Power Supply
  • •Welding Machine
  • •Tachometer / Stroboscope
  • •Timer / Stopwatch / Counter
  • •Insulation Resistant Meter